Lexmark 30E Scanning to a flash drive or memory card, Scanning photos into an editing application

Notes:

•If the printer is connected only to a local computer, then the printer will automatically download a list of the scan applications.

•You may be prompted to enter a PIN if the computer requires it. Enter the PIN using the keypad.

•To assign a computer name and a PIN to the computer, see the Help for the printer software associated with your operating system.

4Select an application, and then touch Accept.

5Select the color, resolution quality and the original image size. If necessary, touch Accept each time you make a selection.

6Press to start scanning.

The scan is complete when the application you selected in step 4 opens on the destination computer, and the scan appears within the application as a new file.

Scanning to a flash drive or memory card

Before you begin, make sure your flash drive or memory card is not write protected.

1Load an original document faceup into the ADF or facedown on the scanner glass.

2From the home screen, navigate to Scan to Memory Device: Scan > Scan to Memory Device

3Insert the flash drive or memory card.

Notes:

•The printer reads only one memory device at a time.

•If a flash drive is inserted into the USB port while a memory card is in the card slot, then a message appears on the display prompting you to select which memory device to use.

4Select the output file type you want to create.

Note: Select the PDF file type if you want to scan multiple pages and save them as one file.

5Select the color, resolution quality, and original image size. If necessary, touch Accept each time you make a selection.

6Press to start scanning.

The scan is complete when a message appears on the printer control panel indicating that the file you scanned has been saved.

Scanning photos into an editing application

Using the printer control panel

1Load an original document faceup into the ADF or facedown on the scanner glass.

2From the home screen, navigate to Scan to Computer: Scan > Scan to Computer

Scanning

66