Lexmark Pro900, 30E, 301, 4444, 90T9105 Saving paper default settings, a Touch Paper Tray Linking

Load up to

20 sheets of banner paper

Make sure

•The print side of the banner faces down.

•The leading edge of the banner paper feeds into the printer first.

•If your printer has more than one paper tray, then load banner paper in Tray 1.

To load banner paper:

1Pull the tray completely out of the printer.

2Remove all paper from the tray.

3Move the paper guides as though you were loading legal-size paper.

4Squeeze the lever and pull to extend the tray to legal size.

5Tear off only the number of pages needed to print the banner.

6Set the stack of pages in front of the printer.

7Slide the first sheet from the stack of pages over the tray handle and all the way into the back of tray.

Saving paper default settings

You can set the default paper and paper tray settings for the documents and photos that you print.

1From the home screen, touch .

2Choose the default settings:

•If you want to set the default paper size:

aTouch Paper Setup, and then select the paper tray you want to set up. b Touch Paper Size.

c Select the default paper size for the tray, and then touch Accept.

•If you want to set the default paper type:

aTouch Paper Setup, and then select the paper tray you want to set up. b Touch Paper Type.

c Select the default paper type for the tray, and then touch Accept.

•If you want to enable paper tray linking:

aTouch Paper Tray Linking.

bTouch Automatic, and then touch Accept.

When paper tray linking is enabled, the printer automatically picks up paper from the other paper tray when the default paper tray runs out of paper.

Loading paper and original documents

35