Lexmark Pro900 Using the printer wirelessly, Using the printer locally USB, Select Printer Home

Note: There is no need to remove the USB cable connecting the printer to the computer during wireless configuration.

Switching between USB, Ethernet, and wireless connections (Windows only)

You can change the way you access your printer, depending on your needs. The following procedures assume that you have configured your printer for one type of connection and that the printer drivers are installed on the computer. See related topics on troubleshooting specific connection types if you encounter difficulties during configuration.

Note: The printer supports one active local connection (USB) and one active networkconnection (Ethernet or wireless) at a time. It is not possible to use both Ethernet and wireless at the same time.

Using the printer wirelessly

Select the connection type that describes how you currently access your printer:

If the printer is currently set up locally (using USB connection)

1Click or Start.

2Click All Programs or Programs, and then select the printer program folder from the list.

3Select Printer Home.

4Click the Settings tab.

5Click the Wireless setup utility link.

6Follow the instructions on the computer screen to set up the printer wirelessly.

If the printer is currently set up for Ethernet

1 Unplug the Ethernet cable from the printer.

2 Place the printer close to the computer you want to use to configure the printer for wireless access.

Note: You will need to connect the printer to the computer with a USB cable. Make sure the printer is close enough to the computer for your USB cable to reach both.

3Click or Start.

4Click All Programs or Programs, and then select the printer program folder from the list.

5Select Printer Home.

6Click the Settings tab.

7Click the Wireless setup utility link.

8Follow the instructions on the computer screen to set up the printer wirelessly.

Using the printer locally (USB)

Select the connection type that describes how you currently access your printer:

If the printer is currently set up for Ethernet

1Attach a USB cable to the computer and to the printer.

2Wait for a moment for Windows to locate the driver and finish setting up the printer.

Networking

110