Case 3: Network connector of computer is free (system environments E, F)

Crossover cable (supplied)

To NETWORK

connector

To NETWORK connector

Setup

Computer

Note

Network Media Receiver

When connecting the Network Media Receiver and the computer as shown above, the following settings must be configured:

•Assign a fixed IP address to the computer (this page).

•Select an IP address allocation method for the Network Media Receiver (page 33).

Assigning a fixed IP address to the computer

When the Network Media Receiver is connected via a network cable in one of the system environments listed below, a fixed IP address must be assigned to the computer.

•E, F (page 24)

•G (page 24) without router with built-in hub

Note

Do not use this system configuration if the system environment includes a router (or a router with built-in hub).

1On the computer, click “Start” on the Windows taskbar, and click “My Computer” to display the “My Computer” window.

2Click “More” and “My Network Places”.

The “My Network Places” window appears.

3Click “Show Network Connections”.

The “Network Connections” window appears.

4Right-click “Local Area Connection”, and click “Properties”.

The “Local Area Connection Properties” window appears.

27