Click “OK”.
5
Click “OK”.
7
zHint
When the above setting is selected, the computer automatically enters Standby mode 20 minutes after the connection between the Network Media Receiver and the computer is terminated.
8 Close the “Device Manager” window, and click “OK” on the “System Properties” window.
Checking or changing the time required to enter Standby
Use the procedure described below to check or change the computer Standby settings. If you set up the computer so that it automatically shuts down when the Network Media Receiver is turned off, you will not have to walk over to the computer to turn it off. Without this setting, shutting down the computer will require additional steps performed at the computer.
A VAIO series computer is set up by default to go into Standby automatically after several minutes of non-use.
1 On the computer, click the “Start” on the Windows taskbar, and click “Control Panel”.
2 In the “Control Panel” window, click “Performance and Maintenance”, and click “Power Options”.
The “Power Option Properties” windows appears on the computer display.
3 Click the “Power Schemes” tab.
4 Under “System standby” or “System hibernates”, select the time until the computer goes into the Standby or Hibernate mode.
This setting should be “After 3 mins” or higher. If you select “Never”, the computer will remain on.
6 Click the “Power Management” tab. Select the “Allow this device to bring the computer out of standby” check box, and select the “Only allow management stations to bring the computer out of standby” check box.
Features Advanced
53