Remote Commander

The keys which have the same names as on the control panel function identically.

You can control a connected computer using the Remote Commander.

For details, see “Connecting with a Computer” on page 16 (GB).

qsqd

qa

1

02

MUTING

9PIC

 

INPUT SELECT

 

 

VIDEO

A

B

3

 

 

 

 

 

S VIDEO

 

 

 

 

VIDEO MEMORY

 

 

1

2

3

 

 

4

5

6

4

 

OFF

 

 

 

 

 

 

MENU

5

8

 

 

 

6

7

RESET

 

ENTER

PROJECTOR

RM-PJVW10

1I (ON) key

Press this key to turn on the projector. (It is assumed that the projector is in the Stand-by state.)

2 1 (OFF) key

Press this key to turn off the power immediately.

3INPUT SELECT keys Select the input signal.

VIDEO: Selects the signal of equipment connected to the projector’s VIDEO connector.

S VIDEO: Selects the signal of equipment connected to the projector’s S VIDEO connector.

A:Selects the video signal of equipment connected to the INPUT A connectors.

B:Selects the video signal of equipment connected to the INPUT B connectors.

Location and Function of Controls

4VIDEO MEMORY keys

You can store an image setting to one of the VIDEO MEMORY keys (1 – 6), and you can directly recall the setting by pressing the appropriate key.

For more details on how to set the video memory, see the VIDEO MEMORY of the INPUT SETTING menu on page 25 (GB).

5MENU key

6ENTER key

7RESET key

8Arrow keys (M/m/</,)

9MUTING PIC key

Cuts off the picture. Press again to restore the picture.

0LIGHT switch

Pressing this switch turns on the key light on the Remote Commander. Pressing this switch again turns off the key light. If no keys are operated, the lights will automatically turn off in 30 seconds.

Install the two batteries in the Remote Commander when you use the key light.

qa Transmission indicator

Lights up when you press a key on the Remote Commander.

qs CONTROL S OUT jack (stereo minijack)

Connects to the CONTROL S IN jack on the projector with the connecting cable (not supplied) when using the Remote Commander as a wired one. In this case, you do not need to install the batteries since the power is supplied via the CONTROL S IN jack on the projector.

If the batteries are not installed, the Remote Commander key light is not turned on.

qd Infrared transmitter

13 (GB)