Using the MENU

The projector is equipped with an on-screen menu for making various adjustments and settings.

You can select the language for displaying in the menu.

For details on the selecting the language used in the menu, see page 17 (GB).

1 Press the MENU key.

The menu display appears.

The menu presently selected is shown as a yellow button.

PICTURE CTRL

INPUT-A

 

CONTRAST:

80

BRIGHT:

50

RGB ENHANCER: 30

COLOR TEMP: LOW

2 Use the M or m key to select a menu, then press the , or ENTER key.

The selected menu appears.

Menus

Setting items

SET SETTING

INPUT-A

 

STATUS:

ON

 

INPUT-A:

COMPONENT

 

INPUT-B:

COMPONENT

 

LANGUAGE:

ENGLISH

 

POWER SAVING:

OFF

 

SIRCS RECEIVER:

FRONT&REAR

3 Select an item.

Use the M or m key to select the item, then press the , or ENTER key.

4 Adjust an item.

• When changing the adjustment level:

To increase the number, press the M or , key. To decrease the number, press the m or < key. Press the ENTER key to restore the original screen.

• When changing the setting:

Press the M or m key to change the setting. Press the < or ENTER key to restore the original screen.

For details on setting individual items, see the relevant menu pages.

Using the MENU

To clear the menu display

Press the MENU key.

The menu display disappears automatically if no key is pressed for one minute.

To reset items that have been adjusted

Press the RESET key.

“Complete!” appears on the screen and the settings appearing on the screen will be reset to their factory preset values.

Items which can be reset are:

•“CONTRAST”, “BRIGHT”, “COLOR”, “HUE”, “SHARP” and “RGB ENHANCER” in the PICTURE CTRL menu.

•“DOT PHASE”, “SIZE H” and “SHIFT” in the INPUT SETTING menu.

About the memory of the settings

The settings are automatically stored in the projector memory.

When no signal is input

When there is no input signal, “NO INPUT–Cannot adjust this item.” appears on the screen, and each item cannot be adjusted.

menu the using settings and Adjustments

21 (GB)