Projecting

When the 16 : 9 picture is displayed on the

4 : 3 screen

Example: The 120 inch screen is used.

2,438

1,3711,829

The 110 inch picture is displayed.

4:3 screen

16:9 picture

Size

Size

Unit (mm)

Unit (mm)

(Inch)

(Inch)

80

73

1,626

 

 

1,626

1,219

914.6

 

100

91

2,032

 

 

2,032

1,524

1,143

 

120

110

2,438

 

 

2,438

1,829

1,371

 

Notes on changing the aspect

This projector provides you with the various choices of aspects. When changing the aspect, check the following:

•Select an aspect taking into account that one which changes the aspect ratio of the original picture will provide a different look from that of the original image.

•Also note that if the projector is used for profit or for public viewing, modifying the original picture by switching aspects may constitute an infringement of

the rights of authors or producers which are legally protected by laws.

To turn off the power

To turn off the power from the control panel

1 Press the I / 1 key on the control panel.

“Power OFF?” appears on the screen.

Note

The message will disappear if you press any key except the I / 1 key, or if you do not press any key for five seconds.

2 Press the I / 1 key.

The ON/STANDBY indicator flashes in green and the fan continues to run for about 120 seconds to reduce the internal heat. Also, the ON/STANDBY indicator flashes quickly for the first 40 seconds. During this time, you will not be able to turn the power back on with the I / 1 key.

3 Unplug the AC power cord from the wall outlet after the fan stops running and the ON/STANDBY indicator lights in red.

When you cannot confirm the on-screen message

When you cannot confirm the on-screen message in a certain condition, you can turn off the power by holding the I / 1 key for about one second.

To turn off the power from the Remote Commander

1 Press the 1 key on the Remote Commander.

2 Unplug the AC power cord from the wall outlet after the fan stops running and the ON/STANDBY indicator lights in red.

Note

Do not unplug the AC power cord while the fan is still running; otherwise, the fan will stop although the internal heat is still high, leading to breakdown of the projector.

20 (GB)