Sony VPL-VW11HT Others, Warning messages, Caution messages

		Troubleshooting
Others
Symptom	Cause	Remedy
The LAMP/COVER indicator	The lamp cover or the air filter is	Attach the lamp cover or the air filter securely (see
flashes.	detached.	pages 34 (GB) and 35 (GB)).
The LAMP/COVER indicator	The lamp has reached the end of its life.	Replace the lamp (see page 34 (GB)).
lights up.
	The lamp becomes a high temperature.	Wait for 120 seconds to cool down the lamp and
		turn on the power again (see page 20 (GB)).
The TEMP/FAN indicator	The fan is broken.	Consult with qualified Sony personnel.
flashes.
The TEMP/FAN indicator	The internal temperature is unusually	Check to see if nothing is blocking the ventilation
lights up.	high.	holes.
		Check to see if the air filter has been used over
		500 hours.
		Check to see if the air filter is clogged with dust.
Both LAMP/COVER and	The electric system failed.	Consult with qualified Sony personnel.
TEMP/FAN indicators light up.
Warning messages

Use the list below to check the meaning of the messages displayed on the screen.

Message	Meaning	Remedy
High temp.!	Internal temperature is too high.	Turn off the power.
Lamp off in 1 min.		Check to see if nothing is blocking the ventilation
		holes.
		Check to see if the air filter has been used over
		500 hours.
		Check to see if the air filter is clogged with dust.
Frequency is out of range!	This input signal cannot be projected as	Input a signal that is within the range of the
	the frequency is out of the acceptable	frequency.
	range of the projector.
	The resolution setting of the output	Set the setting of output to the XGA (see page 16
	signal of a computer is too high.	(GB)).
Please check INPUT-A	You have input RGB signal from the	Set INPUT-A correctly (see page 27 (GB)).
setting.	computer when INPUT-A in the SET
	SETTING menu is set to COMPONENT,
	DTV YPBPR or DTV GBR.
Please check INPUT-B	You have input RGB signal from the	Set INPUT-B correctly (see page 27 (GB)).
setting.	computer when INPUT-B in the SET
	SETTING menu is set to COMPONENT,
	DTV YPBPR or DTV GBR.
Please replace the LAMP.	It is time to replace the lamp.	Please replace the lamp.
Please replace the filter.	The air filter is clogged with dust.	Please replace the air filter.

Caution messages

Use the list below to check the meaning of the messages displayed on the screen.

Message	Meaning	Remedy
NO INPUT	No input signal	Check connections (see page 15 (GB) and 16 (GB)).
Not applicable!	You have pressed the wrong key.	Press the appropriate key.

37 (GB)