To reset A-B Repeat

When you want to change a specific portion, stop the A-B Repeat playback and tag point A and point B again.

Notes

•You cannot specify a repeat portion that includes both sides of the tape.

•You cannot specify a repeat portion shorter than 2 seconds.

•After repeated operation, the actual portion that is played back may shift somewhat from the exact portion specified with the tags due to tape slack.

•A-B Repeat stops automatically after repeating 50 times.

•Do not use the A-B Repeat function with tapes longer than 90 minutes. If you do, the tape may be damaged.

4 For manual tuning

1Press SET to choose

MANUAL.

2Press TUNE/PRESET + or

– repeatedly to tune in to the desired station. Hold down TUNE/ PRESET + or – for a few seconds to scan for stations.

For preset tuning

1Press SET to choose

PRESET.

2Press TUNE/PRESET + or

– repeatedly to recall the desired preset station. To use preset tuning, preset stations first (see “Presetting Radio Stations”).

Listening to the Radio

1 Press RADIO ON/BAND to turn on the radio.

2 Press RADIO ON/BAND repeatedly to select AM or FM.

3 Press MENU on the main unit repeatedly and set the cursor in the display to

TUNE MODE.

58

To turn off the radio

Press RADIO OFF.

To improve the broadcast reception

•For AM: Reorient the unit itself.

•For FM: Extend the remote control cord (antenna). If the reception is still not good, press MENU repeatedly to set the cursor in the display to FM MODE. Then press SET to choose from “MONO” (monaural), “LOCAL” or none (stereo) for best reception.