Using Your C1 PictureBook Computer
31 |
System Hibernation Mode
The state of the system is saved on the hard drive and power is turned off. The power indicator light is off in this mode.
To activate System Hibernation mode
Press Fn+F12. You can also use the PowerPanel utility to enter System Hibernation mode.
To return to normal mode
Turn on the computer by sliding the power switch forward. The computer returns to its previous state.
✍When returning from System Hibernation mode, the system status stored on the hard disk is erased and the computer starts normally if you slide the power switch forward and hold for more than four seconds.
❑Time to return to normal mode:
System Suspend requires less time than System Hibernation.
❑Power consumption:
System Suspend uses more power than System Hibernation.
