Card remote commander RM-X301

7

3

1

6

 

qs

qg

 

qh

4

 

qd

qj qf

qk

Note

If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.

Tip

For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander” on page 24.

The following buttons on the card remote commander have also different buttons/functions from the unit.

qs ENTER button To apply a setting.

qd Number buttons 14, 15, 16

To input numbers (phone number, passcode, etc.).

Buttons 1 to 6 share the same functions as the number buttons on the unit.

qf button 16

qg M (+)/m (–) buttons

The same as pushing the joystick up/down.

qh < (.)/, (>) buttons

The same as pushing the joystick left/right.

qj VOL (volume) +/– buttons To adjust volume.

qk button 16

*1 When an MD changer is connected.

*2 When the SAT tuner is connected.

*3 When a Bluetooth audio device (supports AVRCP of Bluetooth technology) is connected. Depending on the device, certain operations may not be available.

11