Display

Image

To set various display images.

–“SpaceProducer” (z): to create animated on- screen patterns in time with the music.

–“off”: to not display any image.

–“All”: to step repeatedly through the display images in all display modes.

–“SA 1 – 5”: to display the Spectrum Analyzer.

–“Movie 1 – 3”: to display a movie.

–“Wallpaper 1 – 3”: to display a wallpaper.

–“SA All”/“Movie All”/“Wallpaper All”: to step repeatedly through the display images of each mode.

Info (Information)

To display the items (depending on the source, etc.).

–“All”: to display all items.

–“Simple” (z): to not display any items.

–“Clear”: to have items automatically disappear.

Demo*1 (Demonstration)

To set “on” (z) or “off.”

Dimmer

To change the brightness of the display.

–“Auto” (z): to dim the display automatically when you turn lights on.

–“on”: to dim the display.

–“off”: to deactivate the dimmer.

Auto Scroll

To scroll long displayed item automatically when the disc/album/group/track is changed.

–“on”: to scroll.

–“off” (z): to not scroll.

Receive Mode

Local (Local seek mode)

–“off” (z): to tune normal reception.

–“on”: to only tune into stations with stronger signals.

Mono (Monaural mode)

To improve poor FM reception, select monaural reception mode.

–“off” (z): to hear stereo broadcast in stereo.

–“on”: to hear stereo broadcasts in monaural.

IF

–“Auto” (z): to automatically narrow the reception frequency to eliminate noise.

–“Wide”*2: to always hear FM stereo broadcasts in stereo and with full frequency reception.

BTM (page 12)

Sound

EQ3 Preset

To select an equalizer type: “Xplod,” “Vocal,” “Edge,” “Cruise,” “Space,” “Gravity,” “Custom” or “Off” (z).

EQ3 Tune

See “Customizing the equalizer curve” on page 19.

DSO

To select the DSO mode: “1,” “2,” “3” or “off” (z). The larger the number, the more enhanced the effect.

Balance

To adjust the balance between the right and left speakers: “R10” – “±0” (z) – “L10”

Fader

To adjust the balance between the front and rear speakers: “F10” – “±0” (z) – “R10”

Subwoofer

To adjust the subwoofer volume: “+10” – “±0” (z) – “–10”

(“– ∞” is displayed at the lowest setting.)

LPF (Low Pass Filter)

To select the subwoofer cut-off frequency: “off” (z), “125Hz” or “78Hz.”

AUX Level

To adjust the volume level for each connected auxiliary equipment. This setting negates the need to adjust the volume level between sources (page 21).

Adjustable level: “+6 dB” – “±0 dB” (z) – “–6 dB”

*1 When the unit is turned off.

*2 In such cases, some FM stereo broadcasts may become monaural while in the stereo reception mode.

Customizing the equalizer curve— EQ3 Tune

“Custom” of EQ3 allows you to make your own equalizer settings.

1Select a source, then press (MENU).

2Select “Sound” c “EQ3 Preset” c

“Custom,” using the joystick.

3Select “EQ3 Tune” using the joystick.

4Select the desired frequency range from “LOW,” “MID” and “HI.”

continue to next page t

19