Tips

•Preset Dial also allows you to make a call by pressing a number button twice after pressing

(CALL).

•On the “Dialed Calls,” “Received Calls” and “Preset Dial” menus, you can make a call by pressing (CALL) while the phone number is displayed.

Presetting the volume of ring tone and talker’s voice

You can preset the volume level of the ring tone and talker’s voice.

To adjust the ring tone:

Rotate the joystick while the phone is ringing. “Ring Vol” appears and ring tone volume is set.

To adjust the talker’s voice:

Rotate the joystick during a call. “Talk Vol” appears and the talker’s voice volume is set.

Sending DTMF (Dual Tone Multiple Frequency) tones

You can send DTMF tones.

To send DTMF tones, use the joystick or press the required number buttons (0 – 9, or ) on the card remote commander during a call.

Receiving calls

When receiving a call, ring tone is output from your car speakers.

For details on the settings for receiving a call and during a call, see “Setting a handsfree device” on page 17.

1When receiving a call, press (CALL),

(MENU) or (Bluetooth).

(Bluetooth)

(MENU) (CALL)

The phone call starts.

To reject a call

Press (OFF).

Tips

•If you set “Auto Answer” to on, the phone call is automatically started in the set time (page 17).

•If (CALL) is pressed during a call, the handsfree function is deactivated, and the microphone and speaker of the cellular phone are activated. In this case, the Bluetooth connection may become disconnected depending on the cellular phone.

Ending calls

1 Press (OFF).

Note

Even if the call is ended, the Bluetooth connection is not canceled.

Using the PhonebookReceiving phonebook data from a cellular phone

1Select “Phone Settings” from the Bluetooth function menu.

2Select “Receive PB.” “Waiting…” appears.

3Send the phonebook data by operating the cellular phone.

“Data Receiving…” appears while receiving the phonebook data.

“Complete” appears when receiving is complete.

Notes

•Before receiving phonebook data, disconnect any cellular phone or audio device.

•To cancel the transfer of phonebook data, operate the cellular phone. Transfer cannot be canceled from this unit.

Storing the numbers from “Dialed Calls” or “Received Calls”

1Select “Dialed Calls” or “Received Calls” from the CALL menu.

2Select the phone number to store, then select “Save.”

The “Contact Name” display appears.

3Input a name.

Up to 20 characters can be input.

4Select “Save?” c “yes.”

Note

Up to 50 phone numbers can be stored in the Phonebook. If you try to register more than 50 numbers, “Memory Full” appears.

Deleting from the phonebook

1Select “Phonebook” c “Contact List” from the CALL menu.

2Select the name to delete.

3Select “Delete Contact” c “yes.”

To clear all phonebook data, select “Delete All” in step 1. After clearing, confirm that all phonebook data has been cleared properly.

Changing a name in the phonebook

1

Select “Phonebook” c “Contact List” from the

 

CALL menu.

2

 

16

When the call ends, talk time appears for a few seconds.

Select the name to change.

3 Select “Edit Name,” then input a new name.