EC/NC Mode*4 (Echo Canceller/Noise Canceller Mode)

To reduce echo and noise in phone call conversations.

Set to “Mode 1” (z) normally. If the quality of the outgoing sound is unsatisfactory, set to “Mode 2” or “off.”

Speaker Sel*4 (Speaker Select)

To set the front speaker to output the ring tone, dial-tone and other party’s voice.

–“FR-L” (z): to output from the left channel of front speakers.

–“FR-R”: to output from the right channel of front speakers.

–“Front”: to output from both front speakers.

Security

To lock the personal information in the following menus by setting a 4-digit password (page 15).

“Dialed Calls,” “Received Calls,” “Phonebook,” “Preset Dial,” “Receive PB”

If you set the security, “Security Locked” appears when the above menus are operated. To unlock the security, select “Unlock” and input the password number.

*1 If “Security” is set, “Security Locked” appears and operation is not possible.

*2 If a character that cannot be displayed on this unit is used, it is not displayed correctly.

*3 Depending on the cellular phone, this unit’s ring tone may be output even if set to “Cellular.”

*4 Configurable during a call.

Note

If you select “Initialize” in the Security setting, all stored data is deleted (“Dialed Calls,” “Received Calls,” “Phonebook” and “Preset Dial”).

Deleting the registration of a connected device

1Press (Bluetooth).

The Bluetooth function menu appears.

2Select “Connectivity” c “Handsfree

Devices” or “Audio Devices.”

The list of registered devices appears.

3Select the device to delete.

4Select “Delete” c “yes.”

To clear all devices in the selection list, select “Delete All” in step 4.

Auto connection function

If your car’s ignition switch is set to the ACC position, this unit reconnects automatically to the last connected Bluetooth device.

Other functions

Adjusting menu items — MENU

1Press (MENU).

2Push the joystick up/down until the desired menu item appears, then push it right.

The items changes as follows:

Setup y Display y Receive Mode y Sound

3Push the joystick up/down until the desired setting item appears, then push it right.

The digital indication moves to the right (setting selection) side.

4Push the joystick up/down to select the setting, then press it.

The setting is complete.

5Press (MENU).

The display returns to normal play/reception mode.

Note

Displayed items will differ, depending on the source and setting.

Tips

•You can go to the next menu level by pressing the joystick.

•In step 5, push the joystick left until “EXIT” appears, then press the joystick, instead of pressing (MENU).

•You can enter the Sound setting menu directly by pressing (SOUND) on the card remote commander.

The following items can be set (follow the page reference for details):

“z” indicates the default settings.

Setup

Clock Adjust (page 6)

Beep

To set “on” (z) or “off.”

RM (Rotary Commander)

To change the operative direction of the rotary commander controls.

–“NORM” (z): to use the rotary commander in the factory-set position.

–“REV”: when you mount the rotary commander on the right side of the steering column.

AUX Audio*1

To turn the AUX source display “on” (z) or “off” (page 21).

Version*1

To display the unit’s firmware version.

18