Getting Started

Resetting the unit

Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit.

Detach the front panel and press the RESET button with a pointed object, such as a ball-point pen.

RESET button

Note

Pressing the RESET button will erase the clock setting and some stored contents.

Setting the clock

The clock uses a 12-hour digital indication.

1Press (MENU).

2Push the joystick up/down until “Setup” appears, then push it right.

3Push the joystick up/down until “Clock Adjust” appears, then push it right.

4Push the joystick up/down to set the hour and minutes.

To move the digital indication, push the joystick left/right.

5After setting the clock, press the joystick.

The clock starts.

Adjusting the volume level of each device

When connecting to a portable audio device via the BUS AUDIO IN/AUX IN terminal, we recommend adjusting the volume level of the connected device, or adjusting the volume level for the connected device in the Setup menu on this unit. See “Adjusting the volume level” (page 21) for a device connected to AUX IN.

Detaching the front panel

You can detach the front panel of this unit to prevent theft.

Caution alarm

If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used.

1Press (OFF).

The unit is turned off.

2Press (OPEN).

The front panel is flipped down.

3Slide the front panel to the right, then gently pull out the left end of the front panel.

1

2

Notes

•Do not drop or put excessive pressure on the front panel and display window.

•Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray.

6