Notes

•While connecting to a Bluetooth device, this unit cannot be detected from another device. To be detected, disconnect the current connection and search for this unit from another device.

•Depending on the device, searching from this unit may not be possible. In this case, search for this unit from the connecting device.

•If you search for this unit and the connecting device mutually at the same time, this unit will not recognize the connecting device.

•It may take time to search or connect.

•Depending on the device, the confirmation display of the connection appears before inputting the passcode.

•The time limit for inputting the passcode differs depending on the device.

•This unit can register up to 6 devices each for handsfree and audio devices.

•This unit cannot be connected to a device that supports only HSP (Head Set Profile).

Connecting to registered devices

Devices are registered once paired and connected with this unit. You can select the registered device and connect it.

1Press (Bluetooth).

The Bluetooth function menu appears.

2Select “Connectivity” c “Handsfree

Devices” or “Audio Devices.”

The list of registered devices appears.

3Select the device to connect.

4Select “Connect.”

“Connected” appears and connection is complete.

“ ” or “ ” appears during connection.

To stop the connection

Select “Disconnect” c “yes” in step 4.

Tip

Depending on the device, it may be possible to select this unit from the device, and then connect.

Handsfree talking

Check that this unit and the cellular phone are connected beforehand (page 14, 15).

Notes

•For details on operation when a cellular phone with Bluetooth audio streaming function is connected as an audio device, see “Listening to music from an audio device” on page 17.

•The microphone of this unit is located on the rear of the front panel (page 10). Do not mask the microphone with tape, etc.

•Even if you activate the ATT function during a call, the outgoing sound will not be attenuated.

Making calls

You can make a call from the connected cellular phone by operating this unit.

1Press (CALL).

The CALL menu appears.

2Select the items in the following order, then press the joystick to start calling.

CALL menu

Dialed Calls*

Selects from the dialed call history. (Maximum storable name and phone numbers: 10)

Name and phone number to call c “Call”

Select “Delete” to delete the name and phone number, “Delete All” to clear the history.

Received Calls*

Selects from the received call history. (Maximum storable name and phone numbers:10)

Name and phone number to call c “Call”

Select “Delete” to delete the name and phone number, “Delete All” to clear the history.

Phonebook*

Selects from the phonebook list. (Maximum storable name and phone numbers: 50)

“Contact List” c Name to call c the name and phone number

For details on how to store in the phonebook, see “Using the Phonebook” on page 16 and “Setting a handsfree device” on page 17.

Dial

Inputs the phone number using the joystick or card remote commander.

To input “+,” press and hold the 0 button on the card remote commander.

Preset Dial*

Selects the phone number stored in a number button.

Preset number (P1 – P6) c “Call”

For details on how to store in the number buttons, see “Using the Preset Dial” on page 17.

*If you set “Security” (page 18), “Security Locked” appears and operation is not possible.

continue to next page t

15