Operating an audio device with this unit
You can perform the following operations on this unit if the audio device supports AVRCP (Audio Video Remote Control Profile) of Bluetooth technology. (The operation differs depending on the audio device.)
Adjust the volume on this unit.
5
3 Select “Delete” c “yes.”
Music streaming
Listening to music from an audio device
You can listen to music of an audio device on this unit if the audio device supports A2DP (Advanced Audio Distribution Profile) of Bluetooth technology.
1 Connect this unit and the Bluetooth audio device (page 15).
“ ” appears during connection.
2 Turn down the volume on this unit.
3 Press (SOURCE) repeatedly until “Bluetooth AUDIO” appears.
4 Operate the audio device to start playback.
Select the preset number to delete.
2
Select “Preset Dial” from the CALL menu.
1
Note
To replace a registered preset number, delete the existing registration first, then store the new phone number.
Deleting the Preset Dial
Select the name to store.
Select a phone number of the selected name. Select “yes” when “Save?” appears.
3
4
5
Using the Preset DialStoring the Preset Dial

You can store a phone number in the phonebook to the Preset Dial.

1Select “Preset Dial” from the CALL menu.

2Select the preset number (P1 – P6) to store, then select “Preset Memory.”

To

Do this

Skip tracks

Push the joystick left/right.

 

 

Reverse/fast-

Push and hold the joystick left/

forward a track

right.

 

 

Pause

Press (6) (PAUSE)*.

 

 

*Depending on the device, it may be necessary to press twice.

Operations other than the above should be performed on the audio device.

Notes

•During audio device playback, the track number, elapsed playing time and playback status are not displayed.

•Even if the source is changed on this unit, playback of the audio device does not stop.

Tip

You can connect a cellular phone that supports A2DP (Advanced Audio Distribution Profile) as an audio device and listen to music.

Other settings

Setting a handsfree device

You can set various functions when a cellular phone compatible with the Bluetooth function is connected as a handsfree device.

1Press (Bluetooth).

The Bluetooth function menu appears.

2Select “Phone Settings.”

3Select the desired menu.

4Select the setting.

5Press (Bluetooth).

Phone Settings menu

“z” indicates the default settings.

Receive PB*1*2 (Receive Phonebook)

To receive and store the phonebook data from a cellular phone (page 16).

Auto Answer

–“on”: to start a call automatically when

received. Set the time to start a call: “1 sec” – “60 sec”

–“off” (z): to not start a call until (CALL),

(MENU) or (Bluetooth) is pressed.

Ringtone

To switch the ring tone.

–“Cellular*3” (z): to output the ring tone set with the cellular phone.

–“Default”: to output this unit’s ring tone.

continue to next page t 17