before turning off.
Changing Volume
Your Headset features tactile volume buttons that respond simply to finger contact. Volume adjustments will only be possible during calls. To increase the volume, with the Headset on, press briefly touch Vol+ Sensor [4]. To decrease the volume, briefly touch the Vol- Sensor [5]. The Headset will remember all volume settings even when it is switched off.
Accepting/rejecting* a call
When the phone rings (ring tone can be heard in Headset), briefly press the Push4TM Button [2] once to accept the call. Press the Push4TM Button [2] twice to reject the call.
Initiating a call from your mobile phone
Dial the number as usual with your phone. If your Headset is on and the phone has been correctly paired, your phone will transfer the call to your Headset.
Initiating a call with voice dialling
You may be able to initiate the voice dialling function from your Headset (your phone will need to support voice dialling and voice tags need to be entered). To activate, briefly press the Push4TM Button [2]. You will then be able to speak the name of the person you wish to call.
Ending a call
Press the Push4TM Button [2] briefly dur- ing a call and the call will be ended.
Disconnecting from the phone*
You may wish to disconnect the Head- set from the phone in order to reduce
battery consumption. To do so, press the Push4TM Button 3 times on the Headset when it is not in an active call. If you want to pick up a call, you first need to
Battery life
To conserve battery life, your Headset features an
When the battery has only 10% charge remaining, the Headset will produce an audible warning tone sequence every time a call is ended. Also the Indicator Light [2] will start flashing red.
Resetting your Headset
Should your Headset stop responding, try charging it for a few seconds. Your Headset should now function again as normal.
Muting the microphone
During a call, briefly press the Push4TM Button [2] twice. A tone will be heard every 2 seconds during the call to remind you that the microphone is muted. Two additional presses of the Push4TM Button will reactivate the microphone.
Transferring a call to the phone*
Press the Push4TM Button 3 times dur- ing a call to transfer the call to the mobile phone. Pressing the Push4TM Button [2] once again will transfer the call back to the Headset.
Last number redialling*
Press Push4TM Button twice to make
5
