SOYO SY-7VCA2 user manual Processor Number Feature, Vcore voltage Setup, Quick Power On Self Test

BIOS Setup UtilitySY-7VCA2

3-1.4 Processor Number Feature

	Setting	Description	Note
Processor
	Disabled	Setting this item to enabled will allow	Default
Number	Enabled	application programs to read the ID-
Feature		code in your Pentium III CPU,
		disabling this item will not allow any
		program to read the CPU ID code.

3-1.5 Vcore voltage Setup

Vcore voltage	Setting	Description	Note
Setup

Vcore voltage Adjust

Normal		Default
+1.5 %	The CPU notifies the board of what core	voltage
+3.0 %	it requires by its VID outputs. The on-board
+4.5 %	voltage regulator uses the VID code to set the
	core voltage. If the Vcore Voltage Adjust is set to
+6.0 %
	normal, the Vcore will be exactly what the VID
+7.5 %
	code specifies. If an adjustment percentage is
+9.0 %
	selected the Vcore will be that percentage higher
+10.0%	than the VID code specifies. For instance the CPU
	VID code specifies 2.0V and the Vcore Voltage

adjust is set to +10.0% the actual CPU Voltage will be 2.2V. This function should only be used if the CPU is running on FSB Frequencies beyond the CPU specifications, note that SOYO does not guarantee system stability if this item is not set to normal.

3-1.6 Quick Power On Self Test

	Setting	Description	Note
Quick Power
	Disabled
On Self Test	Enabled	Provides a fast POTS at boot-up.	Default

58