Chapter 3: Getting the Voice Mail System Up and Running
STEP 4
Install Sprint Digital
Voice
To install Sprint® Digital Voice:
1.Mount Sprint Digital Voice on a wall, using the screw slots located on the bottom of the cabinet. Use the enclosed template as a guide when wall mounting. Make sure that the ventilation slots are not blocked. Position the cabinet so that the LEDs are not blocked from view.
OR
Place Sprint Digital Voice on any sturdy flat surface.
2.Plug Sprint Digital Voice power supply cord into the connector labeled “24 VAC.” Place the adapter box into a 120V, 60 Hz grounded outlet. See Figure 3.
Tools Need for Wall-Mounting
Onto Plywood Drill
1 / 8 in. Bit Phillips screwdriver
Onto Drywall
Drill
1 / 4 in. bit Hammer
Phillips screwdriver
Port1 | Port2 | Port3 | Port41 | IOIOI | 2 |
ACPowerCord |
Figure 3: Installing Sprint Digital Voice
10 – ◆ – Getting the Voice Mail System Up and Running | Issue 1.6 |
