Chapter 3: Getting the Voice Mail System Up and Running
STEP 2
Observe Safety
Precautions
STEP 3
Install Your Phone
System
Phone System Safety Precautions:
Before beginning installation of a Protegé® phone system, read through Important Safety Instructions found in the Installation and Maintenance Manual.
Sprint® Digital Voice Safety Precautions:
•Do not expose this product to rain or any type of moisture.
•Do not locate the unit near heating appliances.
•Do not expose the operating unit to direct sunlight.
•Locate the unit away from devices that generate electrical noise like fluorescent lamps and motors.
•Protect the unit from dust, high temperatures, and vibration.
•Do not place any covering over the unit while it is in operation.
•Do not obstruct the ventilation holes on the sides of the unit.
•Allow at least two inches of clearance from any adjacent surface.
•Keep the environment at a temperature of 50° to 104° F (10° to 40° C) with a 10 - 90% relative humidity
If this is a new installation, install the Protegé phone system in accordance with the phone system Installation and Maintenance Manual.
IMPORTANT NOTE ABOUT THE OUTSIDE LINES
Request outside lines with open loop flash disconnect supervision from the phone company. Outside lines with open loop disconnect supervision prevent the recording of unwanted silence. This can happen when an Automated Attendant caller records a message and then hangs up but Sprint Digital Voice is unable to detect the hang up.
Also, request that the telephone company apply an open loop of at least 300 milliseconds. If this feature is not available in the area, request that continuous dial tone be sent upon disconnect from the far end (that is, when an Automated Attendant caller hangs up).
Once the Protegé phone system is installed and operational proceed with Step 4.
Issue 1.6 | Getting the Voice Mail System Up and Running – ◆ – 9 |
