To insert the microSD card into your phone:

1.With your phone powered off, remove the back cover and then remove the battery. (See “Removing the Battery” on page 24.)

2.Gently place the microSD card on the cardholder as shown below.

Tip:

The writing on the microSD card should face up.

microSD Card

3.Replace the battery and the back cover.

Note:

Make sure your battery is fully charged before using the microSD card. Your data may become damaged or unusable if the battery runs out while using the microSD card.

Be sure to use only recommended microSD cards (64MB2GB). Using non-recommended microSD cards could cause data loss and damage your phone.

Section 2I: Using the microSD Card

117

Page 133
Image 133
Sprint Nextel MOTOKRZRTM manual To insert the microSD card into your phone, 117