SPX Cooling Technologies Marley MD Marley / MD CoolingTower / Specifications Base, Access

Marley / MD CoolingTower / Specifications: Base

32

	Specifications	Specification Value
10.0	Access:
10.1	A large rectangular access door shall
	be located in the plenum on the motor
	side of the tower.
11.0	Cold Water Collection Basin:
11.1	The collection basin shall be heavy-	■ The MD tower design offers side-suction as standard. Bottom outlets
	gauge galvanized steel and shall	may be supplied to accommodate a variety of piping schemes. Unless
	include the number and type of suction	so specified, the tower you may be asked to approve may only be avail-
	connections required to accommodate	able with one type of suction connection requiring you to redesign your
	the out-flow piping system shown on	piping layout.
	the plans. Suction connections shall be	The sloping floor and low-level drain is valuable because it provides a
	equipped with debris screens. A fac-
	tory installed, float operated, mechani-	way to achieve flush-out cleanability.
	cal make-up valve shall be included.
	An overflow and drain connection shall
	be provided in each cell of the tower.
	The basin floor shall slope toward the
	drain to allow complete flush out of
	debris and silt which may accumu-
	late. Towers of more than one cell
	shall include steel flumes for flow and
	equalization between cells.
13.0	Warranty:
13.1	The MD cooling tower shall be free
	from defects in materials and work-
	manship for a period of eighteen (18)
	months from the date of shipment.