SSI America 90-2581 REV B manual Operation, 3.1.1Control Panel

3.OPERATION

3.1Pump Front Panel Controls and Indicators

3.1.1Control Panel

3.1.1.1Digital Display

The 3-digit display shows the pump flow rate (mL/min), system pressure (psi), or the set upper or lower pressure limit (psi) when operating. Choice of display is selected with the MODE key.

3.1.1.2 Digital Display Pump Keypad

∆

∇

When pressed, this button increases the flow rate.

When pressed, this button decreases the flow rate.

Use this button to cycle through the four display modes: flow rate, MODE pressure, upper pressure limit, or lower pressure limit. A status LED

RUN

to the right of the digital display indicates which mode is active.

When pressed, this button alternately starts and stops the pump.

STOP

Fast And Slow Button Repeat On The Up And Down Arrow Buttons: If the UP-ARROW or DOWN-ARROW button is held down for more than approximately one half of a second, the button press will repeat at a slow rate of approximately 10 times a second. Once slow button repeat has begun, fast button repeat can be initiated by using a second finger to press down the second arrow button. During fast button repeat, the button press will repeat at a rate of approximately 100 times a second. Switching back and forth between repeat speeds can be accomplished by pressing and releasing the second arrow button while keeping the first arrow button held down.

3-7