Fanfold Paper, Labels | Star Manufacturing LC-4522 manual

Paper Handling 42

Fanfold Paper

Width (push feed): 4 ² to 1 6.5² / 101.6 to 419mm

Width (pull feed): 4 ² to 1 6.0² / 101.6 to 406mm

Thickness: 0.00276² to 0.00433 ² / 0.07 to 0.11mm (1-ply)

0.01378 ² / 0.35mm max. (total thickness of multi-ply, non -carbon) Weight: 14 to 22 lbs / 52 to 82g/m 2 / 45 to 70 kg (one-ply)

11 to 14 lbs / 40 to 52g/m 2 / 34 to 45 kg (multi-ply) Copies: Original + 1 or 2 (Normal Mode)

Original + 3 or 4 (Multi-Part Mode)

Multi-part Mode and an optional pull tractor are recommended when printing on 4 or 5 -ply paper.

Labels

Backing sheet: 4 .5² to 16.5² / 114 to 419mm

Thickness

Backing sheet: 0.00276² to 0.0035 ² / 0.07 to 0.09mm

Total: 0.0075² / 0.19mm

•Use labels under normal temperature and humidity conditions only.

Image 45

Star Manufacturing LC-4522 user manual Fanfold Paper, Labels

Contents

LC-4522 Contents Using the EDS Mode Choosing a place for the printer Printer Setup Unpacking the printer Printer Setup General guide General guide Removing the protective materials Opening the front cover Removing the protective m aterials Installing the ribbon cassette Installing the platen knob Installing the ribbon cassette Removing the ribbon cassette Installing the paper guide Installing the paper guide Standing up the paper guide Connecting to a power outlet and turning power on and off Connecting to a power outlet and turning power on and off Loading fanfold paper Loading fanfold paper Printer Setup Loading fanfold paper Printing on fanfold paper Parking fanfold paper Unparking fanfold paperParking fanfold paper Connecting to your computer Using the tear-off functionPage Control Panel Operations Switching between on-line and off-line Entering the Print Quality Lock Mode Selecting a Print QualitySelecting a font Entering the Multi-part Mode Paper eject cut-sheet paper Line feedForm feed fanfold paper Micro feed Setting the top of form position Selecting the Quiet Print ModeTear-off function fanfold paper Changing the auto load position Changing the auto load position Clearing the printer’s buffer Saving a macro Initializing the printer Initializing the printer About EDS Mode settings Entering the EDS ModeUsing the EDS Mode Selecting a switch Changing a switch settingSelecting a bank Selecting a bank Exiting the EDS Mode Printing the current switch settings EDS Mode Settings EDS Mode Settings Switch 7 Not Used Switch 6 Quiet modeSwitches 1,2 Print mode Switches 3, 4, 5 Print Pitch Switch 3 Auto Tear off Long Switches 1,2 Multi-Part ModeSwitch 4 Skip over perforation Tractor mode only Switch 5 FF command selection Friction mode only Switch 2 Character Set Switch 1 Character TableSwitch 3 Zero Style Switches 4,5 Reserved Switch 6 Print Width Switch 5 Top Margin Switches 1,2,3,4 Page Length Friction ModeSwitches 6,7 Not Used Switches 1,2,3,4 Page Length Tractor Mode Switch 2 CR Centering at seem line Tractor mode only Switch 1 CR Centering at topSwitch 3 CR Centering Position Switch 4 Paper Out Detector Switch 6 Print direction command Switch 5 BuzzerSwitches 1, 2, 3, 4 International Character Set Switch 5 Strobe timing Switches 1, 2, 3, 4, 5 Code Switch 6 Saving Control Panel Status Setting up for printing with MS-DOS Setting up for printing with MS-DOS Paper Handling Selecting paper typesCut-Sheet Paper Manual Feed Cut-Sheet Paper with Optional Automatic Sheet Feeder Labels Fanfold Paper Adjusting for paper thickness Adjusting for paper thickness Manual sheet feeding Automatic fanfold feeding Clearing paper jams Clearing paper jams