disabled (ON), the computer must send both a line feed code and a carriage return code at the end of each line. Most applications do this automatically.
32 Using the EDS Mode
Note the following check points when trying to figure out which setting to use here: 3 If you find that your ou tput is
this switch ON (Disabled).
3 If you find that lines are printing over each other, turn this switch OFF (Enabled).
Switch 6: Quiet mode
When the Quiet Mode is enabled (OFF), the printer prints with less noi se than normal printing. Though the Quiet Mode prints more quietly, it also takes considerably longer than normal printing.
Switch 7: Not Used
BANK B
Switches 1,2: Print mode
Turn these switches on or off to select the print mode you want to use.
ON, O N | :LQ mode |
ON, OFF | |
OFF,ON | :Draft mode |
OFF,OFF |
Switches 3, 4, 5: Print Pitch
Turn these switches on or off to form the pattern that matches the print pitch
setting you want to make. |
|
|
ON, ON, ON :10cpi | OFF,ON, ON | :20cpi |
ON, ON, OFF :12cpi | OFF,ON, OFF | :Proportional |
ON, OFF,ON :15cpi | OFF,OFF,ON | :10cpi |
ON, OFF,OFF :17cpi | OFF,OFF,OFF :10cpi | |
Switch 6: LQ Font Selection
Selects Roman (ON) or Sanserif (OFF) font to use for LQ printing.
