ON, OFF,OFF,OFF :8.0 inch | OFF,OFF,OFF,OFF :11.0 inch |
36 Using the EDS Mode
Switch 5: Top Margin
Selects
Paper
Switches 6,7: Not Used
BANK C
Switch 1: CR Centering at top of page
Specifies whether the printer execute CR Centering at the top of page (ON) or not (OFF). When the printer execute CR Centering, the paper is fed smoothly.
Switch 2: CR Centering at seem line (Tractor mode only)
Specifies whether the printer execute CR Centering at seem line (OFF) or not (ON). The thick paper is fed smoothly at the perforation when select this feature.
Switch 3: CR Centering Position
Specifies whether the printer's CR centering is long (ON) or short (OFF). When the CR centering position is long (ON), the carriage moves to the center of the platen before the paper is inserted or ejected. When CR centering is short (OFF), the carriage moves to the left side of the platen.
In order to prevent paper feeding problems, set the CR centering position to short (OFF) when narrow (less than 6²) paper is used and set it to long (ON) when wider (more than 6 ²) paper is used.
Switch 4: Paper Out Detector
Specifies whether the printer’s paper out detector is enabled (ON) or disabled (OFF). When the paper out detector is enabled (ON), the printer automatically stops printing whenever it senses there is no more paper. When it is disabled (OFF), the printer continues printing as long as there is data. Selecting disabled (OFF) makes it possible to print right up to the bottom of a page, but it also creates the danger of printing when there is no paper loaded in the printer, which can damage the print head and platen.
