c_
/
.
5
Warning: The print head gets hot during operation, so
let it cool off before you touch it.
Figure 1-4. Press the cartridge into place until the holdmg springs
snap into place.
3. Using the guide holders as a fulcrum with the ribbon fac-
ing away from you, as shown in Figure 1-4, lightly press
the cartridge down until the two holder springs snap shut
to hold the cartridge firmly in place.
4. Check that the cartridge fits so that the drive pins engage
the cartridge teeth.
5. Gently slide the print head carriage manually all the way
to your right or left until the ribbon automatically slips
down into its proper place between the print head and the
silver ribbon guide.
6. Put the printer cover back on and you’re finished. (A
special switch on the printer prevents the printer from
working when the cover is off.)