*_
.
17
1. Make sure both your computer and printer are turned
off.
2. Connect one end of the interface cable to the connector
socket at the right rear of the printer as shown in Figure
2-10.
3. Connect the other end of the cable to your computer as
described in the computer manual.
/-
Figure 2-10. This is how you connect the cable.
‘EXTRA FUNCTIONS WITH THE CONTROL PANEL
There are many functions that are not directly specified on
the control panel. In this section, we’ll show you these extra
functions.
Italic mode _I
Italic and Panel mode L Panel mode
Figure 2-11. Extra functions while turning on the printer.