Star Micronics NX-10 user manual Special Features Printer

CHAPTER 5

SPECIAL FEATURES OF

THE PRINTER

Subjects we’ll cover in Chapter 5 include-

*Printer’s bell; • Master reset;

• Uni-directional printing;

• International character sets; • Printing BIG characters;

• The optional sheet feeder; • Macro instruction;

• Reading a hex dump.

In the previous chapters we have learned about several groups of control codes. In this chapter we will look at more con- trol codes. These codes don’t fit neatly into any of the groupings that we have studied, but they add a lot of capability to your printer. So here goes.

nNow hear this

You may have heard the printer’s bell if you have ever run out of paper. And you may have wondered why it’s called a bell when it beeps instead of ringing! It’s a long story that goes back to the early days of computers, when teletype machines were us- ed for computer terminals. These mechanical marvels had a bell in them that could be heard for blocks. This bell was used to signal the operator that somethings needed attention. The code that the computer sent to the teletype machine to ring the bell

. was, reasonably enough, called a bell code. Well the name bell code is still with us, even if the bell has changed to a beeper, and a lot of people still call the beeper a bell, even if it doesn’t sound like one. So with our trivia lesson out of the way, let’s see how we can “ring the bell.”

The code to sound the “bell” is CHR$(7), which is ASCII code

7 or (BEL). Any time your printer receives this code it will