14
9. Now set the release lever to the auto-feed setting-the
top position. The printer will advance the paper
automatically.
10. When the paper stops, set the release lever for single
sheets again.
To align paper that is not in straight-
. Set the release lever to the adjustment setting.
l Straighten the paper and adjust it for the margins you
want.
l Move the release lever back to its original setting.
n Loading sprocket-feed paper
This is the familiar computer paper, with the holes along the
sides and perforations between the sheets. It is also called
sprocket, punched, fan-fold, or just plain “computer paper.” It
can be as narrow as 4”) and up to 10” wide.
Figure 2-7 shows the tractor unit. Please identify the parts of
the tractor.
1. Turn on the printer and set the release lever for sprocket-
feed paper.
2. If the paper guide is installed, remove it.
3. Place a stack of fan-fold paper behind the printer.
4:Open the sprocket covers, on the right and left sprocket
units, as shown in Figure 2-7.
Figure 2-7. Open the sprocket covers to expose me sproaet teem.