157
APPENDIX
DIP Switch 2
The following table shows all the possible settings for DIP Switch 2. The
factory default setting for this switch is all ON.
Switch Parameter ON OFF
2-1 Thermal Print Density See table below
2-2
2-3 Input Buffer Size Big Small
2-4 Printer mode Combo mode Independent
mode
2-5 Interface See table below
2-6 Command Emulation
2-7 Not Used
2-8 Not Used
Thermal Print Density Switch 2-1 Switch 2-2
Light OFF OFF
Standard ON ON
Heavy ON OFF
Very Heavy OFF ON
Input Buffer Size Switch 2-3 Switch 2-4
4KB
ON
ON (Combo mode)
Receipt printer: 4KB
Slip printer: 512 bytes OFF (Independent mode)
45 bytes
OFF
ON (Combo mode)
Receipt printer: 45 bytes
Slip printer: 35 bytes OFF (Independent mode)