13
ENGLISH
Using slip paper
The following procedure describes how to print on slip paper using the slip
printer. Before trying to print on slip paper, be sure to install a ribbon cassette
into the slip printer using the procedure under “Installing the ribbon cassette” on
page 4.
❏Make sure that the printer is plugged in and turned on.
❏Place a piece of slip paper onto the slip printer’s document table and slide
its leading edge into the slip printer. Printing will be performed on the side
of the paper that is facing up (the one you can see), starting from the edge
you insert into the slip printer.
❏Push the leading edge of the slip paper into the slip printer until it stops. At
that time, the SLIP indicator will blink slowly, and the slip printer
mechanism will automatically align the paper for printing from the top.
❏Send data from your host computer to be printed on the slip paper inserted
in the slip printer.
Important!
When the printer is initially shipped from the manufacturer, it is set to print
using the receipt printer if data from the computer is received. To print using
the slip printer, the command to select the print station on page 26 must be sent
to the printer. Be sure that paper has been inserted into the receipt printer,
otherwise this command will be cancelled.
❏After printing, press the SLIP/RESUME button to automatically release
the slip paper (causing the SLIP indicator to go out).
Slip paper