4
ENGLISH
Opening the printer cover
❏
Press in on the printer cover release to disengage the hook that holds the
printer cover in place and swing the cover up to open it. Allow the cover to
swing all the way open until it stops.
❏
To close the cover, swing it back down into position. Next, press in on the
printer cover release and guide the tab into the slot so the cover locks
securely in place.
Installing the ribbon cassette
❏
Make sure that the printer is turned off and unplugged from its power
outlet.
❏
Open the printer cover.
❏
Remove the ribbon cassette from its packaging, and turn the knob on the
ribbon cassette in the direction indicated by the arrow to take up any slack
in the ribbon.
❏
Check if the printer is released condition.
If not, connect the printer to the power as described on page 6. Turn on the
power and press the
SLIP/RESUME
button on the control panel, then turn
off the power.