CHAPTER 3
PARTS REPLACEMENT AND RELATED ADJUSTMENTS
This chapter describes disassembly and reassembly procedures.
Please take note of the following.
1. | ALWAYS disconnect the power cord from the AC outlet before beginning a disassembly or reassembly |
| |
| procedure. |
| |
2. | Except where otherwise stated, the reassembly procedure is the reverse of the disassembly procedure. |
| |
|
|
| |
3. | Coat screw heads with locking sealant after completion of reassembly. | 3 | |
4. | Refer to Chapter 4 Section 2 for important information about lubrication requirements. | ||
| |||
|
|
|
Note : The printer has no adjustable parts.
1. | Upper Casing Unit | 35 |
2. | 36 | |
3. | Printer Mechanism | 37 |
4. | Main PCB, Interface PCB | 38 |
5. | Power Unit | 39 |
6. | Fuse | 39 |
7. | Printhead Unit | 40 |
8. | Feed Motor Assembly | 40 |
9. | Detectors | 41 |
10. | Label sensor | 41 |
