PARTS REPLACEMENT
| 4 |
2 |
|
1 | 5 |
3 |
|
7.Printhead unit
(1)Remove the upper casing unit. (See 1. above.)
(2)Pull the pressure stay 1 forward to open the head frame unit 2.
(3)Slide the head clamp 3in the direction indicated by the arrow. Remove the printhead unit 4.
(4)Remove the head connector 5.
Note : Be careful to avoid damaging the heat elements when installing the replacement unit.
1 |
2 |
8.Feed Motor Assembly
(1)Remove:
∙Printer mechanism (See 3. above.)
∙Two tapping screws 1
∙Feed motor assembly 2
– 40 –
