Dual-BinAutomaticSheetFeeder
(sF-loRMII/15RMII)
Theprocedureto mountthe Dual-BinASFis:
1.
2.
3.
4.
Openthefrontcover byliftingup thebackusingthe twogrips oneither
side,then swingdownthe transparentpart(seeFigure 3-l).
Openthe rearcoverby liftingup thefrontusing thetwo gripson either
side,then removeitupward.
Ifthe paperguideisinstalled,removeitbeforetakingoff therearcover.
Movethebail leverontop ofthe printerforwardto openthe paperbail.
Astackerisincludedwiththe AutomaticSheetFeeder.Attachthehook
atthe top of the stackerto theAutomaticSheetFeeder. Thenpush the
lowersection ofthe stacker downinto position,andengagethe lower
hookas shownin Figure3-9.
Figurs3-s?.Attachthestsckertothe AutomaticSheetFeeder.
5. Tipthe AutomaticSheetFeederforwardslightlyandputthefeederinto
placebehindthe printerplatenroller.
6. Lowerthe rear sideof the AutomaticSheetFeeder andattach itto the
platenshaft.
7. Closethefront coverwiththe transparentpartin theopen position.
8. ‘Attachtheclear plasticpapersupportsbetweentheleft and rightpaper
guidesofthe hopperbins andthe stacker.
20