the top treadmill display screen will read, PALM PC IR DETECTED immediately followed by PALM PC PROFILE.
At this point, you will have the option to press START/ENTER on the treadmill display.
If you press START/ENTER, you may be asked to step on the weight scales (on Elite model treadmills only) or confirm your weight entry. The programmed time will be displayed. Press ENTER to confirm your program profile and your workout will begin.
If the treadmill is unable to pick up a signal, or if the PDA displays a message of “Exercise product not responding,” take the PDA out of the cup holder and tap Beam again. Make sure the IR window on the PDA is pointed up, or towards the top of the cup holder.
If the treadmill continues to not respond, contact the front desk staff at your facility to verify that your facility’s treadmills are equipped with the Pro Partner feature.
Collecting Your Workout Data
Leave your PDA positioned in the water bottle holder for the duration of your workout. It will continuously collect data as you progress through your workout. It will update the data upon speed and level changes or once per minute.
NOTE: If you need to remove your PDA from the left cup holder, you may do so at any time. The power does not need to be on during the workout but it does need to be turned on before your workout is complete. If you want to track your workouts, you must return the PDA to the left cup holder BEFORE your workout session is complete so that the details of your workout can be beamed back to your PDA.
When your workout is complete, remove your PDA from the treadmill and tap on Done to save your workout data. Your information will be stored and it is ready to be reviewed at any time.
2. Beaming to a Pro Bike
Select your workout by tapping on the Star Trac exercise product you wish to perform your workout on. In the example below, we will select the Pro Bike. The screen will list workout profiles created for the Pro Bike (see images below).
15
