Star Trac 727-0083 manual Mounting Computer On Handlebars V-Bikes, Required

Mounting Computer On Handlebars - V-Bikes

required:

15Minutes

required:

727-0083 Spinning® Computer Kit

NOTE: The thick insert is used on the V-Bikes required:

M5 Allen Wrench

M2 Allen Wrench

Place the thick insert inside the bottom part of the Mounting Bracket Clamp. Position the mounting

bracket onto the center-curved portion of the handlebars. Once positioned correctly, tigh the 4 M6x20 screws using the M5 Allen tool.

Install the computer onto the mounting bracket by sliding the computer clamp over the long portion of the bracket. Tighten computer clamp with the M6 screw and nut using the M5 Allen tool.

Note: Use the M6x30 screw for the computer clamp when installing onto the computer mounting bracket.

19