Testing for RPM
required:
Less then 5 Minutes
required:
N/A
required:
N/A
EST Procedure:
Once the batteries are installed, press any button and the display window will turn on in Workout mode.
Test by waving a magnet across the cadence sensor. If you see RPM values, then the cadence sensor and computer was synced successfully, there is no need to perform the sync process.
If you do not get any rpm reading and the computer turns off you WILL need to perform the Syncing process.
OTE: If the cadence sensor and computer are no longer a pair (i.e. when users swap andlebars with the computer attached.) the Cadence sensor and computer will have to be ync’d again. Do not swap handlebars.
TION: TEST ONE BIKE AT A TIME, the range for the cadence sensor is oximately 30 feet and if you are testing the bike and someone else o n the s is pedaling another bike you may be picking up the wrong RPM signal.
11
