Blender
Maximum Rate
Clear the inventory totals
Accumulated Number of Batches
Average
Batch Time
Inventory
Totals
Go to Recipe
Page
Material
Usage Rate
This display indicates the amount of material in pounds that has been used by each feeder of the recipe. It is important to note that the weights are rounded off to the closest pound. On minor ingredients, several cycles may have to occur to show an inventory number.
In addition to showing the amount of material that has been used for each feeder, this screen is also a summary display that shows the total inventory, the time for the last batch, and the average rate of the blender.
If the blender is run in “Percentage Mode” instead of “Quick Set” during operation, the “Percentage Mode” will use the blender inventory numbers shown on the Inventory screen to calculate the percentages for each ingredient. It is important to zero the inventories when a recipe is changed to have this screen accurately reflect the current percentages of the recipe
Note: Blender inventories must be cleared when the current recipe is started to show accurate percentages for the current recipe.
To clear inventories, press the “Clear Inventory” key on the “Inventory” screen.
5-8-14 Recipe Menu
Note: Refer to the menu structure in section
The SGB System contains several operator friendly recipe menus. This section of the manual lists these recipe menus:
•Recipe Page (Start/Setup)
Page 68 of 118 | SGB Batch Blender with Mitsubishi Controller |
