the mixer section of the blender. If the dump delay is set, the mixer will start before the weigh hopper dump will open for the selected time.

The blender will sit at rest until the high-level sensor in the mixing chamber is uncovered to start another weigh cycle. (Unless the Re-Mix timer is set to a value other than 0 and times out to restart the mixer to run for another mix cycle.)

The level sensor is located on the back wall of the mixer chamber. If the sensor is covered with material, the indicator light on the back of the sensor will be lit.

Once this sensor is uncovered, the indicator lamp on the back of the level sensor will go out. This level sensor must be uncovered for approximately 1 - 2 seconds to indicate to the controller that there is room in the mixing section to accept a batch of material.

When the controller has determined that the mixer is ready for an additional batch of material, the controller will begin metering material into the weigh hopper assembly.

5-8-13 Standard Run Time Displays

While the blending system is in operation, there are a couple of displays available to the operator. These displays are selected simply by pressing the “NEXT” key when the unit is running. The default display shown when the blender is in run mode is the Recipe Screen.

The Recipe Screen indicates by feeder number, the amount of material metered into the weigh hopper assembly by that particular feeder. This display is updated after each component dispenses its specified amount. The ingredient weights (Unit Values) are in pounds, unless the metric display is selected.

Pressing the “NEXT” key when in the default recipe mode display will toggle to the next screen, which is the Inventory Display. This can be done at any time, but if the blender is in a critical mode such as dumping, and updating inventory, etc., it may ignore the keystroke. Simply press the “NEXT” key again, the Inventory screen will be displayed.

SGB Batch Blender with Mitsubishi Controller

Page 67 of 118

Page 66 Page 68
Page 67
Image 67
Sterling A0567659 manual Standard Run Time Displays
Page 66 Page 68

A0567659 specifications

Sterling A0567659 is a premium-grade product designed to meet the needs of various industrial applications. As an exceptional piece of equipment, it reflects advancements in engineering and technology, ensuring high performance and reliability.

One of the key features of the Sterling A0567659 is its robust construction. Built using high-quality materials, it withstands harsh working conditions, making it suitable for demanding environments. Its durable design minimizes wear and tear, leading to a longer lifespan and reduced maintenance costs. This resilience is complemented by sophisticated corrosion resistance, ensuring that the product remains functional even in challenging climates.

Another notable characteristic of the Sterling A0567659 is its advanced technological integration. The product comes equipped with cutting-edge automation technologies that enhance its operational efficiency. These advancements enable streamlined processes, reducing the room for error and increasing overall productivity. Users benefit from intuitive interfaces that facilitate easy monitoring and control, allowing for quick adjustments and data analysis in real-time.

The Sterling A0567659 also prioritizes energy efficiency. With rising energy costs and increasing environmental concerns, this product has been designed to consume less power without compromising performance. Its innovative design incorporates features such as optimized airflow and heat management, resulting in lower operational costs and a reduced carbon footprint.

Safety is another critical aspect of the Sterling A0567659. Equipped with comprehensive safety features, including emergency shut-off systems and user-friendly operational protocols, it ensures that operators can work confidently and without risk. These safety measures comply with international standards, making it a reliable choice for businesses prioritizing workplace safety.

In terms of versatility, the Sterling A0567659 is suitable for a wide range of applications across multiple industries. From automotive to manufacturing and beyond, it adapts well to various operational needs. Its customizable options mean that businesses can tailor the product to their specific requirements, ultimately enhancing performance and optimizing workflow.

In summary, the Sterling A0567659 is a formidable asset for any industrial operation, merging durability, advanced technology, energy efficiency, and safety features into one cohesive unit. Its versatility and reliability make it an excellent investment for companies looking to enhance their productivity and maintain competitiveness in today's fast-paced market.
Top Page Image Contents