Page 76 of 118 SGB Batch Blender with Mitsubishi Controller
5-8-20 Controller Features
5-8-20-1 Display Time and Date
The display Time and Date item in the upper right corner of
the “F940 Config” menu is used to verify the current time and
date information.
5-8-20-2 Setting Date & Time
The Set Date & Time feature is located in the “Panel View
Config” menu of the Setup Screen. This feature allows the
operator to set the SGB’s internal time clock and date. The
clock data must be entered in the traditional Hours, Minutes,
and seconds. The date must be entered in Years, Months,
and Days. All values in this screen can be entered by
pressing on the related button and choosing the correct
number.
Go back to Setup
Directory
Press to Access
the F940
Config