|
|
| STT40 / STT70 |
Table of contents |
| ||
1. | General Information | ||
| 1.1. Warnings and symbols | ||
| 1.2. Explanations and information | ||
| 1.3. Legal basis | ||
| 1.4. Field of application | ||
| 1.5. Notes on Usage | ||
2. | Safety instructions | ||
| 2.1.1. | Assembly | |
| 2.1.2. | Operation | |
| 2.1.3. | Maintenance | |
| 2.2. For the safety of the device | ||
3. | Start up | ||
| 3.1. Initial Operation | ||
| 3.1.1. Switching on the Dryer | ||
| 3.2. Continuous Operation | ||
| 3.2.1. Switching the Dryer on | ||
| 3.2.2. Setting the Drying Temperature | ||
| 3.3. Switching the Dryer off | ||
4. Error and error correction | |||
5. | Maintenance | ||
| 5.1. Maintenance schedule | ||
| 5.2. Preventative Maintenance | ||
| 5.2.1. Servicing Process Air Filters | ||
| Cleaning or Replacing the Return Air Filter | ||
| 5.2.3. Servicing the Dew Point Monitor | ||
| 5.3. Corrective Maintenance | ||
| 5.3.1. Symptoms of Worn Desiccant | ||
| 5.3.2. | Replacing Worn Desiccant | |
| 5.4. Disposing of Drying Agents | ||
| 5.5. Replacing the Process Heater | ||
| 5.5.1. Replacing/Cleaning the Cooling Coils | ||
| 5.5.2. Replacing the regeneration heating coil | ||
| 5.6. Cleaning the Drying Hopper | ||
6. | Functional description | ||
| 6.1. General Information | ||
| 6.2. Drying Hopper (Optional) | ||
| 6.2.1. | Hopper Heater | |
| 6.3. Connection to a Pneumatic Conveying System (Optional) | ||
| 6.4. Return Air Cooler (Optional) | ||
7. Transporting, Assembly and Storage | |||
| 7.1. Transporting and Packing | ||
| 7.2. Assembly | ||
| 7.3. Storage | ||
8. | Assembly instructions | ||
| 8.1. Installation of the exhaust fan for regeneration of exhaust air |
4