14.3. Quick Start Guide for STT 70 Dryer
1.Check all wiring connections to ensure that they are in the correct place and have a good tight connection.
2.Hook up main
Main power High Temp Safety | Main Power Connection |
Heater Connection Thermocouple
3. Turn the disconnect switch to the “ON” position as shown. The green run light should light up.
4.Turn the dryer operation switch to the desired position. If you have a seven day timer installed, set it to “On with timer” position, otherwise set it to “On without timer” position. The blower will start. An explanation is given in the following diagram.
On without timer
OFF
On with timer
