STT40 / STT70
3. Start up
This chapter is addressed to the operators of the machine.
It assumes the operator has general skills with drying equipment and that the functional description has been read and understood.
Ensure that the operators have the required experience.
)Make sure that the main switch is set to the “0" position. Check the drying hopper for cleanliness.
Check to see whether the adhesive film on the drying hopper has been removed.
If there is a return air cooler, switch on the coolant circuit.
If there is a timer clock (optional), adjust it. Read the timer clock operating manual.
Check whether the release switches for the “Timer” and the “Hopper” (ST1, ST2) are set to the ”0" position.
The “trouble” signal lamp may flash shortly while the valve block is being changed.
