Sterling XXX10-80 - page 110

10-Pump, 80-Station Controller Chapter 8: Appendix 110
40. A keyboard will appear (Fig 30).
Fig 30
41. Enter the appropriate IP Address for the display you are setting up:
• Remote Display #1 - Enter “192.168.10.2” via the keyboard.
• Remote Display #2 - Enter “192.168.10.3” via the keyboard.
• Remote Display #3 - Enter “192.168.10.4” via the keyboard.
• Remote Display #4 - Enter “192.168.10.5” via the keyboard.
42. Press the “Enter” key to close the keyboard.
43. The IP Address Screen (Fig 29) will appear.
44. Press the “OK [F7]” button.