Sterling XXX10-80 CompactLogix L35E Setup

10-Pump, 80-Station Controller Chapter 8: Appendix 82
CompactLogix L35E Setup
Use this procedure to setup a new CompactLogix PLC for use on a 10 Pump – 80 Station Convey
Control.
1. Verify that the control is powered down and the PLC CPU key switch is in the RUN position.
2. Insert the configuration compact flash card containing the new version of the software labeled
PLC Configure 744.00130.00 into the PLC CPU (Fig 1).
Fig 1
3. Turn on power.