Manuals / Sterling Plumbing / Lawn and Garden / Hot Tub

Sterling Plumbing 7104 Series manual Instale la pared acabada, Complete the Installation

Models: 7104 Series

1 44
Download 44 pages 14.55 Kb
Page 34
Image 34

Installer le mur fini (cont.)

Sceller un espace de 1/8″ (3 mm) entre la surface de la baignoire et le matériau du mur fini avec du mastic à la silicone colorée. Laisser prendre le mastic selon les instructions du fabricant.

Instale la pared acabada

Para las instalaciones de sólo bañera

Cepille el polvo y la suciedad del reborde de la bañera.

¡IMPORTANTE! Mantenga una separación de 1/4″ (6 mm) entre la superficie de la bañera y el filo inferior del material de pared resistente al agua, como se muestra. Esta separación sirve como una barrera de contacto en caso de el agua llegara a entrar detrás del sellador de silicona.

Para asegurar que el material de la pared acabada estará a plomo, fije listones de enrasar arriba del reborde de la bañera y contra los postes de madera, como se muestra.

Cubra los rebordes de la bañera con material de pared resistente al agua. Mantenga una separación de 1/4″ (6 mm) entre la superficie de la bañera y el filo inferior del material de la pared.

Instale el material de la pared acabada sobre el material de pared resistente al agua. Mantenga una separación de 1/8″ (3 mm) entre el material de la pared acabada y la superficie de la bañera.

Selle la separación de 1/8″ (3 mm) entre la superficie de la bañera y la pared acabada con sellador silicona de color. Deje que el sellador se seque según las instrucciones del fabricante del sellador.

Complete the Installation

CAUTION: Risk of property damage. Make sure that a watertight seal exists around the drain and overflow.

Connect the drain to the trap according to the drain manufacturer’s instructions.

Install the trim according to the manufacturer’s instructions. Do not install the showerhead at this time.

Remove the protective covering from the bath.

Open the water supply lines, then run the water to flush out any debris.

Close the valves.

Install the showerhead according to the manufacturer’s instructions.

Check all connections for leaks.

CAUTION: Risk of property damage. If holes have been or must be drilled to properly install your accessory, we recommend applying 100% silicone sealant

into the drilled holes before securing the accessory to the wall surround to avoid possible water damage. Follow the accessory manufacturers’ instructions. Improperly installed accessories could cause leaks and may void the warranty.

If applicable, apply 100% silicone sealant into the previously drilled holes in the wall surround. Refer to the accessory manufacturer’s instructions to properly secure the accessory to the wall surround.

If applicable, install all other accessories according to the manufacturer’s instructions.

If a shower door will be installed, apply 100% silicone sealant in the gap where the front edges of the end walls meet the bath surface. This will prevent water from passing through the shower door extrusion to the back side of the wall.

Refer to the shower door manufacturer’s instructions to complete the shower door installation. Only apply silicone sealant where instructed to do so.

If a shower curtain will be used, ensure the rod is installed above the wall surrounds.

1064912-2-A

34

Sterling

Page 33 Page 35
Page 34
Image 34
Sterling Plumbing 7104 Series manual Instale la pared acabada, Complete the Installation, Installer le mur fini
Page 33 Page 35

7104 Series specifications

The Sterling Plumbing 7104 Series is an innovative range of bathroom fixtures designed to enhance both functionality and aesthetic appeal. Catering to modern preferences for clean lines and minimalistic design, this series includes a variety of options such as toilets, sinks, and bathtubs, each designed with the user’s comfort and convenience in mind.

A key feature of the 7104 Series is its use of high-quality materials that ensure durability and longevity. The components are made from vitreous china, known for its smooth surface and easy maintenance. This material not only resists stains and scratches but also helps to maintain cleanliness, making it an ideal choice for busy family bathrooms.

In terms of technology, the Sterling Plumbing 7104 Series integrates advanced flushing mechanisms that enhance performance while conserving water. The series often features a dual-flush option, allowing users to choose between a light flush for liquid waste and a full flush for solid waste. This not only promotes water efficiency but also aligns with contemporary eco-friendly practices, appealing to environmentally conscious consumers.

Comfort is another hallmark of the 7104 Series. Toilets feature ergonomic designs, providing optimal height and bowl shape that caters to the needs of all users. Additionally, the series’ sinks come in various styles, including undermount and pedestal options, ensuring versatile configurations to fit different bathroom layouts.

Installation and maintenance are simplified with the Sterling Plumbing 7104 Series. The products are designed for straightforward installation, with clear instructions and essential mounting hardware included. Moreover, the fixtures are engineered to minimize the need for repairs, thereby reducing long-term maintenance efforts for homeowners.

Overall, the Sterling Plumbing 7104 Series stands out in the market for its combination of style, efficiency, and practicality. With an emphasis on user experience, it incorporates modern technologies and materials that not only look great but also function exceptionally well, making it a worthwhile investment for any bathroom renovation or new build project.